Matches OEM numbers: 360-14333-00, 1A1-14000-99
Reproduction oil injection nozzle for Yamaha motorcycles.
Made in the UK in small batches.
Pipe OD: 3.5 mm
1973-75 RD250 /RD250A /RD250B
1973-75 RD350 /RD350A /RD350B
1976-79 RD250C /RD250D /RD250E /RD250F
1976-78 RD400C /RD400D /RD400E
IMPORTANT FITTING INFORMATION
Please note that during use and cleaning over the years, the elbow fitting holes can get slightly enlarged. Before you fit the elbows and connect the oil lines, you might need to adjust the brass pipe to ensure a snug fit. For this, please use either a centre-punch or a nail and tap gently down the end of the nozzle. This will splay the width of the nozzle to make the pipe a little wider at the end. Once you are happy with the fit, you can attach the feed pipes.
If you notice that the elbow fitting holes are way too large to accommodate even the splayed the 3 mm elbows, we have 4 mm elbow in stock as well.